The Secret Agent-Deep IWB Holster

• The TSAD holster is designed to position the firearm as low as possible along the waistline while still ensuring a secure grip on the weapon. The 20° rearward muzzle rake makes it ideal for behind-the-hip carry. A steel reinforced mouth enables one handed re-holstering.

• The steel reinforced bodyguard is contoured to eliminate any interference with sighting systems and facilitate an unobstructed shooting grip. The addition of the steel keeps it from bending forward over time and interfering with re-holstering.

• This holster utilizes sewn-in sight rails constructed from 12 oz shoe sole leather, renounced for its excellent wear properties. The edges of these rails are angled to ensure full contact with the firearm's slide. This design not only enhances the holster's overall durability but also provides ample space for the front sight to smoothly exit the holster.

• This holster is double-stitched around the firearm with a Union Lock-stitch machine.

• Crafted from 8oz. vegetable-tanned leather made to our specifications by the tannery we have partnered with for over 20 years.

• Each holster is meticulously hand-molded to precisely fit the firearm it was ordered for.

• The holster's edges are expertly burnished and dressed with hard wax, avoiding any cheap painted-on edge coatings.

• The brilliant color is achieved using one of our 4 custom in-house blended dyes. A top coat is then applied and buffed to a brilliant luster.

• The open muzzle end design facilitates easier removal of debris or foreign matter.

• The holster can be ordered with a full , half, or no body guard. Although we recommend at least a half guard to keep a bloused shirt from interfering with re-holstering.

• Holster can be made to accommodate a variety of MRDS’. However the gun will sit in a neutral, 0° rake.

• Please Note: This holster is not suitable for firearms with optics that extend into the ejection port area. If you have any uncertainties regarding compatibility, we strongly encourage you to reach out to us for a discussion about alternative options. Your safety and satisfaction are our top priorities.

• Available in each of the 4 colors we offer, or if you prefer the two-tone look, pic 2 colors of your choosing.

• Available in either rough side out or smooth side out.

• The belt loop system on this model is designed to be detachable. It is mechanically fastened to the holster body using screws that pass through the stud of the snap, the loop, and then secure into a threaded T nut embedded within the holster body. These loops are split in design, and the space between them allows the wearer the flexibility to position the holster between sewn trouser keepers, if desired, to further enhance stability and security. Moreover, the loops are equipped with One Way Snaps, ensuring that they won't accidentally open due to force applied in the direction that would typically cause a standard snap to come undone during the weapon's draw.

• The belt loops can be made to accommodate 1¼”, 1½”, and 1¾” wide belts.